Setting Up AquaBoost

Now that you have unboxed your AquaBoost order, it is time to setup your new device. In this lecture, learn how each component of AquaBoost's hydrodermabrasion system is pieced together.

Takeaways

Setting Up Your AquaBoost System

• Attach the acrylic holder to the side of the AquaBoost unit.
  • Removing the screws on the side and place aside
  • Align the acrylic holder's predrilled holes with the screw holes on the side of the unit and reinsert the screws until secure
• Plug in the AquaBoost Pro power cord into the power cord inlet on the back of the machine
• Plug the Cryo Wand into the Cryo Wand inlet on the back of the machine.
  • This cord uses a twist lock receptacle- one prong on this plug is slightly larger than the other. Line up prongs correctly and insert. Then twist the adjustable piece tightly
  • Plug the other side of the cord into the actual CryoWand hand held piece
• Now, attach the treatment handheld piece to the back of the machine.
  • The cord for this piece has two hoses that are connected together, each of which will secure into their own space.
  • Ensure the separation line of the hose is facing upward
• Secure the collection container onto the back of the system. This piece attaches easily by sliding onto the plate located on the machine
  • The handle on the top of the lid should always face outward. This ensure that the connection tubes will be positioned correctly for the IN and OUT ports.
• Once the collection container is on the back of the system, attach the IN and OUT connection tubes to the top of the container.
• Connect serums to the S1 and S3 ports.
  • Place the desired serum (either Serum 1 or Serum 2) into its holder. Remove the white lid and exchange with the black cap with tubes.
  • Connect the opposite side of the tube to the S1 port on the top of the unit.
• Repeat the connection process for the S3 port using Serum 3.
• There is not a specific piece that goes in the larger holder. This space is for you to use as needed for supplies or anything else you need

Turning On the Device

• On the back on the system, flip the black On/Off switch to the upward position to turn it on.
• To turn on the CryoWand, click the silver circular button. It will glow blue once on.

Attach Treatment Tip

• When you are ready to begin your first AquaBoost treatment, attach the clear acrylic treatment tip to the handheld device by gently pressing it on the tip of the wand.

Resources:

AquaBoost Owner's Manual

• To learn more about setting up your AquaBoost system, it's characteristics, and proper functions view and download the Owner's Manual below.